佐助-草雉剑自制过程 Sasuke-Kusanagi No Tsurugi handmade tutorial

首先，材料时一定要有的。这是我用的材料MDF
First, you must have the material. This is the material i used, MDF


需要用到的工具
Tools needed



好了，现在开始吧
Ok, Let's start now
这是所需要的部分
先割出两片是从刀刃链接手柄部分，全长105cm，阔度2.5cm
然后再从低端开始25cm处做记号，因为是手柄处
These are the parts needed
First, cut two pieces that are 105cm long and 2.5cm high
After that, start from the bottom, measure the length of 25cm for the handle part, and label it.

然后在割出多两片是用来覆盖刀刃的刀鞘部分80cm长，2.6cm阔
最后是加厚手柄处的两片，25cm长，2.5cm阔
After that, measure 25cm from one end and mark it with a pen or pencil, this part will be the handle
Lastly, 2 more pieces for the handle, each 25cm long, 2.5cm high


割出来后大概就是像这样一片（不止一片）
After you have cut it out, it will look something like this (not just 1 piece)然后再将刚才全长105cm的那两片用胶水粘起来
Using glue, stick the 2 105cm long pieces together

粘好了之后再用
After you have stuck them together, wait for the glue to dry, then use a file
来打磨，磨出刀刃的部分
To file out the edge
磨了之后就像这样
It should look like this when you’re done

然后再将手柄部分的那两片，由上一片，下一片粘上去
Stick the 2 25cm long pieces on the part u marked earlier, 1 on each side（up and down)
就象这样，上一片，下一片
Like this, 1 up 1 down

然后量出粘上去后手柄部分的厚度，再割出两片，黏在两旁
After that, measure the thickness of the handle and cut out 2 more pieces of that width and stick it on.

就象这样
Like this

完成后也用同样的方法制作剑鞘
先将剑鞘用的两片和刀刃合在一起，放在板上画出大概的长度。反正完成后可以磨平
到这部分就大概完成了，我忘了拍下来，反正在这之后就是要上色了
我提供一些上色的意见，就是先用poster colour打底色，再用spray喷上去。
至于剑鞘和手柄部分的黑色，可以用黑色胶贴贴上去
完成后大概类似这样吧
When you have done the handle, make the scabbard using the same technique.
Put the 2 pieces for the scabbard on both sides of the blade part, measure the thickness, and cut out a piece of wood 80cm long and as wide as the scabbard (similar to making the handle)
It’s almost done now, the last step is to paint it. I forgot to take photos
Here is a tip for the coloring: use white poster paint as the base before spraying it with spray paint
For the scabbard and handle, cover it with black tape
When you’re done, it should look like this


以上就是我自制的草雉剑的过程，不敢说是教程，因为很多部分没处理好，而且失败了两次，这次的也不算很成功，只能说是比较满意的一次。有问题的话直接留言吧。游客也好，能帮的我尽量帮。
This is how I made my Kusanagi no Tsurugi. If you have any problems, you can post a comment to ask me. I will try my best to help you